HEAT SEALERS > KF-150CSTA Teflon Coated Portable Direct Heat Sealer (w/Adjustable Temperature Controller)
KF-150CSTA Teflon Coated Portable Direct Heat Sealer (w/Adjustable Temperature Controller)

The product you selected is currently unavailable.

Price: $184.95
Availability: This product is back-ordered; it is unavailable for ordering at this time please come back or continue shopping.
Prod. Code: KF-150CSTA

KF-150CSTA Teflon Coated Portable Direct Heat Sealer
For CELLOPHANE BAGS or (Cello) POLYPROPYLENE BAGS
The KF-150CSTA Model comes with an adjustable temperature controller giving the user
a much wider range of temperature settings enabling greater variety of material to be used.


The KF-150CSTA is a Teflon coated portable hand operated direct heat sealer, equipped with 2 heated 9/16" (15mm) wide
and 6" long serrated jaw. NOTE: The maximum width bag you can seal on this unit nicely is 5 1/2” wide.
The temperature controller is adjustable up to 450 degrees Fahrenheit. (110 Volts/40 Watts (25 on the top jaw and 25 on the bottom jaw). This sealer requires approximately 5 – 15 minute warm-up time in order for this sealer to achieve the correct sealing temperature prior to use.  Unlike an impulse sealer when it is plugged in and turned on the jaws are ALWAYS HOT! Extreme caution is recommended while using this sealer!
We do NOT recommend using the KF-150CSTA on POLY (Polyethylene) Bags. Poly bags melt extremely easy if you have your temperature set to high or you hold the unit down just a second to long you will have a melted bag on the jaws.


NOTE: The KF-150CSTA sealer is an affordable way to give a professional look to any cellophane bag but the unit is designed and recommended for light to medium usage only. It will easily seal a few hundred bags each day, as long as you don’t beat it to death! If you are planning on sealing thousands of bags each week you really need to consider the purchase of a Heavy Duty constant heat sealer.

The KF-150CSTA is ideal for sealing all thicknesses of Cellophane Bags that we offer on our website.
PLEASE READ BELOW FOR SEALING RECOMENDATIONS
•    Standard Duty Cellophane Bags (K195, K220, or K250). On the standard duty cellophane bags you will only have to hold the unit down maybe only 1 second to complete the seal on a flat bag and 2 seconds on a gusseted bag without scorching the bag.
•    Heavy Duty Cellophane Bags (K140). On the heavy duty cellophane bags you will only have to hold the unit down maybe only 2 seconds to complete the seal on a flat bag and 3 seconds on a gusseted bag without scorching the bag.
•    Extra Heavy Duty Cellophane Bags (CelloPlus-T). On the extra heavy duty cellophane bags you will only have to hold the unit down maybe 2 – 3 seconds to complete the seal on a flat bag and 3 seconds on a gusseted bag without scorching the bag.

The KF-150CSTA can also be used to seal all thicknesses of Polypropylene Bags that we offer on our website (RC-100 & RC-140.
PLEASE READ BELOW FOR SEALING RECOMENDATIONS
When using the KF-150CSTA sealer for polypropylene bags start with the temperature controller set low until you find the correct setting for the thickness of the bag. Polypropylene bags melt very easily.

 
NOTE: If you scorch a cellophane bag it will turn brown where you sealed it and the seal will not hold. (TURN BROWN – Similar to it you leave microwave popcorn in for too many minutes and the bag burns). If you burnt the cellophane bag the bag is now useless unless you cut the top of the bag off. Once the coating is burnt off you cannot reseal a cellophane bag in the same place. Same thing goes for not burning the bag but the bag did not seal the coating is now gone and the bag will not seal.

NOTE: The KF-150CSTA can be used by hand, on a table or by an OPTIONAL foot pedal. The pedal and clamp set is an optional accessory, which can be purchased individually. (SEE KF-150 Petal Clamp Kit).The sealer can be clamped anywhere on a table, and the sealing operation can be done using the foot pedal. No special stand and screws for mounting are necessary.

The KF-150CSTA sealer seals by making a series of serrated horizontal lines as shown below. Similar to the seal on the top of a potato chip bag, you would purchase at any retailer.
______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________

The KF-150CSTA comes with the manufacturers 90 day warranty.
Warranty does not cover damage from mistreatment.

 

SAVE 10% OFF ANY ORDER OVER $100.00 - Enter The Promo Code: SAVE10OFF100
Then CLICK APPLY To Receive - 10% OFF Your Order Of $100.00 Or More.

WE DO NOT SHIP TO CANADA OR ANYWHERE INTERNATIONALLY
 

Serving our customers online since 2008 ClearCelloBags.com.
No part of this website maybe copied or published without expressed written consent and permission from ClearCelloBags.com. Online prices, selections, descriptions, specifications
and images generally match,but may vary and are subject to change without notice.
NOTE: All images of products are for display purposes only
and do not represent the actual size of any item.